fbpx
,

APC 650VA UPS (BV650I-MS)

Availability:

In stock


  • Output Power Capacity:375 Watts / 650 VA
  • Max Configurable Power (Watts):375 Watts / 650 VA
  • Nominal Output Voltage: 230V
  • Connections :(4)
  • Universal Receptacle (Battery Backup)

UShs375,000 Inc. VAT

In stock

Product Description

Specifically designed for electronic equipment in harsh power environments, the APC 650VA UPS (BV650I-MS) maximizes productivity and work efficiency while providing critical power during emergencies.

APC 650VA UPS Features

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

Cold-start capable
Provides temporary battery power when the utility power is out.

Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Audible alarms
Provides notification of changing utility power and UPS power conditions.

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Categories: , Tags: , , ,

Technical Specifications

Output

Output power capacity

375Watts / 650VA
Max Configurable Power (Watts)

375Watts / 650VA
Nominal Output Voltage

230V
Output Frequency (not synced)

50/60 Hz +/-1 Hz
Topology

Line Interactive
Waveform type

Stepped approximation to a sinewave
Output Connections

(6) IEC 320 C13 (Battery Backup)
Transfer Time

6ms typical : 10ms maximum

Input

Nominal Input Voltage

230V
Input frequency

50/60 Hz +/- 5 Hz (auto sensing)
Input Connections

IEC-320 C14
Cord Length

1.52meters
Number of Power Cords

1

Batteries & Runtime

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Expected Battery Life (years)

3 – 5

Communications & Management

Control panel

LED Status display with On Line : On Battery
Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Physical

Maximum Height

92MM, 9.25CM
Maximum Width

160MM, 16.05CM
Maximum Depth

305MM, 30.5CM
Net Weight

4.5KG
Shipping weight

4.8KG
Shipping Height

237MM, 23.7CM
Shipping Width

143MM, 14.3CM
Shipping Depth

373MM, 37.3CM
SCC Codes

1073130433830 4

Environmental

Operating Temperature

0 – 40 °C
Operating Relative Humidity

0 – 90 %
Operating Elevation

0-1968.3meters
Audible noise at 1 meter from surface of unit

40.0dBA

Conformance

Approvals

CE

Sustainable Offer Status

RoHS

Compliant
REACH

REACH: Contains SVHCs

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “APC 650VA UPS (BV650I-MS)”

*

There are no reviews yet.

Got a question related to this product? Ask it here.


 
WhatsApp WhatsApp Us