,

APC SRTG10KXLI Smart-UPS (RT 10kVA)

Availability:

In stock


  • 10/100 BaseT Connection; RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB, Input Voltage : 230V, 400V 3PH 3:1
  • Nominal Output Voltage; 230V
  • ECO Mode; Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  • LCD Status Display; Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Maximizes battery performance, life, and reliability through intelligent, precision charging

UShs24,300,000

In stock

Product Description

APC SRTG10KXLI  RT 10kVA UPS. High density, double-conversion on-line power protection with scalable runtime.

APC SRTG10KXLI Features

Protection

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input Power Factor Correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Cold-start capable

Provides temporary battery power when the utility power is out.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Serviceability

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Predictive failure notification.

Provides early-warning fault analysis ensuring proactive component replacement.

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Audible alarms

Provides notification of changing utility power and UPS power conditions

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Manageability

Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

LED status indicators

Quickly understand unit and power status with visual indicators.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

SmartSlot

Customize UPS capabilities with management cards.

Serial connectivity

Provides management of the UPS via a serial port.

Marketing features

Low operating and maintenance costs with proven reliability and intelligent battery management .

Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Avoids costly power problems by keeping your IT equipment and data protected and available .

Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Save time with easy and convenient remote/network accessibility.

Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Peace of mind that comes with full equipment compatibility and reliability of a leader

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Adaptability

Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP.

Availability

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Scalable runtime

Allows additional run time to be quickly added as needed.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

 

Categories: , Tags: , ,
General
provided equipment
Smart UPS signalling RS-232 cable
User manual
Number of tare power
174.6 W
Number of power module free slots
0
Number of power module filled slots
0
redundant
No
UPS size
S
Physical
depth
62 cm
height
21.7 cm
mounting preference
No preference
net weight
81.12 kg
mounting mode
Rack-mounted with kit
two post mountable
0
USB compatible
No
width
44 cm
Input
network frequency
40…70 Hz auto-sensing
number of input connectors
1 hard wire 3-wire (1P + N + E)
input voltage limits
160…285 V
inputvolt_other
220 V
240 V
maximum input current
30 A
max short time withstand current
40 kA
input voltage
230 V
Output
rated power in W
10000 W
Maximum configurable power in W
10000 W
harmonic distortion
Less than 2 %
output frequency
50/60 Hz +/- 3 Hz sync to mains
outputvolt_other
220 V
240 V
crest factor
3 : 1
UPS type
Double conversion online
Wave type
Sine wave
output connector type
Hard wire 3-wire (H N + E) 1
nb of power socket outlets
2 IEC 60320 C13
1 IEC 60320 C19
bypass type
Internal bypass (automatic and manual)
curve equation
Efficiency
curve fixed loss
0.0130
curve load maximum
100 %
curve load minimum
2 %
curve proportional loss
0.0242
curve square loss
0.0229
curve X-axis maximum
100 %
curve test cond ID
Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output.
curve X-axis minimum
0 %
curve X-axis title
Load
curve X-axis units
Percentage
curve Y-axis maximum
100 %
curve Y-axis minimum
50 %
curve Y-axis title
Efficiency
curve Y-axis units
Percentage
full load runtime
00:03:30
graph display
1
half load runtime
00:11:00
output voltage
230 V
Maximum configurable power in VA
10000 VA
rated power in VA
10000 VA
Environmental
ambient air temperature for operation
0…40 °C
relative humidity
0…95 % non-condensing
operating altitude
0…6600 ft
ambient air temperature for storage
-15…45 °C
Storage Relative Humidity
0…95 % Non-condensing
storage altitude
0.00…15240.00 m
acoustic level
55 dB
heat dissipation
2217.98 Btu/h
show note OP temperature
No
IP degree of protection
IP20
Batteries & Runtime
battery type
Lead-acid battery
number of battery filled slots
0
number of battery free slots
0
Battery recharge time
4 h
additional information
Configurable for 220 : 230 or 240 nominal output voltage
liquid value
0
battery voltage
+/- 96 V
battery curve
D
battery charger power
431 W rated
Battery power in VAH
1772 VAh capacity
1772 VAh runtime
battery life
3…5 year(s)
battery option
SRTG192XLBP4 1 3564 VAh
SRTG192XLBP4 2 5415 VAh
SRTG192XLBP4 3 7378 VAh
SRTG192XLBP4 4 9216 VAh
extended runtime
1
Communications & Management
preinstalled device
Network management card
control panel
LED Status display with on line : on battery
Multifunction LCD status and control console
alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency power off
Yes
Surge Protection and Filtering
Surge energy rate
600 J
Packing Units
Package 1 Weight
83.14 kg
Package 1 Height
41.4 cm
Package 1 width
59 cm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “APC SRTG10KXLI Smart-UPS (RT 10kVA)”

*

There are no reviews yet.

Got a question related to this product? Ask it here.


 
X
WhatsApp chat