,

Tripp Lite SVT30KX UPS

Availability:

In stock


  • On-line double-conversion topology, VFI operation
  • Automatic and Manual Bypass for enhanced reliability
  • Optional ECO mode for high-efficiency operation
  • Internal batteries and expandable runtime options
  • Paralleling capability of up to 3 units

UShs45,360,000 inc. VAT

In stock

Product Description

The SVT30KX SmartOnline® SVTX Series 3-Phase 380/400/415V 30kVA 27kW On-Line Double-Conversion UPS with IGBT technology provides battery backup and AC power protection against power disturbances that can damage electronics or destroy data. It’s recommended for critical IT or corporate infrastructure, telecom, LAN/WAN, security and emergency, financial and light industrial applications.

The SVT30KX’s Voltage and Frequency Independent (VFI) design allows continuous operation at any supported voltage at either 50 or 60 Hz. Zero transfer time to battery mode ensures no disruption to the attached loads. Automatic and Manual Bypass keeps connected equipment powered even during overloads and UPS maintenance.

IGBT inverter technology produces output power with less than 2% total harmonic distortion (THD) to keep connected equipment functioning at its peak. A 3:1 crest factor safely supports a variety of loads, even those with wildly fluctuating power demands.

Managing the SVT30KX is simplified through the interactive front-panel LCD interface, which displays critical operating conditions and diagnostic data, such as load levels, available runtime, alarm status, battery charge, and voltage and frequency values. Four LEDs indicate bypass, line, battery and fault modes. A serial port allows connection to Tripp Lite’s free local shutdown agent. A built-in card slot supports WEBCARDLX or RELAYCARDSV for network interface and remote monitoring and control. The SVT30KX’s reduced size and small footprint save valuable space.

Tripp Lite SVT30KX Features

VFI True On-Line Double-Conversion 3-Phase UPS System

  • Provides fully regulated sine wave AC output for critical telecom, network, security, financial, corporate and light industrial applications
  • +/-1% output voltage regulation in online and battery modes
  • High 0.9 power factor offers 30kVA/27kW output capacity, allowing for more connected devices
  • Selectable 380/400/415V output voltage
  • Wide input voltage window (305–478V) minimizes battery use and prolongs battery life

Reliable Battery Backup with Expandable Runtime

  • Supports half load for 10 min. and full load for 4 min.
  • Zero transfer time suitable for advanced network applications
  • Expandable runtime with optional external battery packs, such as Tripp Lite’s BP240V135
  • Restarts automatically after lengthy power outages

IGBT Inverter Technology

  • Produces output power with less than 2% THD to keep connected equipment functioning at its peak
  • Low <6% THDi input rating and advanced IGBT rectifier enables 1:1 Generator Sizing, eliminating costly oversizing requirements for generators, breakers and cables

Paralleling Capability

  • Connect up to 3 units in parallel configuration for increased capacity and fault tolerance

Automatic and Manual Bypass

  • Increases system reliability
  • Allows maintenance without removing power from attached loads

ECO Mode

  • Operates at efficiency levels as high as 98.8% when input line conditions are favorable

SNMP/Web Capability

  • Slot for WEBCARDLX network interface or RELAYCARDSV relay card for remote monitoring and control options

Communications Ports

  • DB9 and EPO ports offer local monitoring and shutdown options

Small-Footprint Tower Design

  • Reduced-size black tower case saves valuable floor space
  • Matching external battery cabinets enable extended runtime options
Categories: , Tags: , ,

Specifications

OVERVIEW
UPC Carton UPC# 037332192462
OUTPUT
Output Volt Amp Capacity (VA) 30000
Output kVA Capacity (kVA) 30
Output Watt Capacity (Watts) 27000
Output kW Capacity (kW) 27
Output Capacity Details Supports up to 100% load continuously in double conversion mode; Supports 100-110% load for 10 minutes, 110 to 130% load for 1 minute and greater than 130% for 1 second before switching to bypass mode; Inverter mode is automatically restored as load levels are reduced to 70% or less; Configuration options support up to 3 SVT30KX systems wired in parallel for increased capacity or fault-tolerant, redundant operation
Power Factor 0.9
Crest Factor 3:1
Nominal Output Voltage(s) Supported 220/380V 3-PH Wye; 230/400V 3-PH Wye; 240/415V 3-PH Wye
Frequency Compatibility 50 / 60 Hz
Frequency Compatibility Details Automatic frequency selection
Output Voltage Regulation (Line Mode) +/- 1%
Output Voltage Regulation (Economy Line Mode) +/-11V of selected nominal output voltage (220V: 209-231V; 230V: 219-241; 240V: 229-251V)
Output Voltage Regulation (Battery Mode) +/- 2%
Output Receptacles Hardwire
Output AC Waveform (AC Mode) Pure Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 48.9A
Nominal Input Voltage(s) Supported 220/380V 3-PH Wye; 230/400V 3-PH Wye; 240/415V 3-PH Wye
Nominal Input Voltage Description 3-Phase Wye, 4 wire plus ground (L1, L2, L3, N, G)
UPS Input Connection Type Hardwire
Input Circuit Breakers 63A (3 pole)
Input Phase 3-Phase
Power Factor (Input) .99PF (100% load)
THDi <6% (100% load)
BATTERY
Full Load Runtime (min.) 4.2 min (27kW)
Half Load Runtime (min.) 9.6 min. (13.5kW)
Expandable Battery Runtime Supports extended runtime optional external battery packs
External Battery Pack Compatibility  BP240V135
DC System Voltage (VDC) 240
Battery Recharge Rate (Included Batteries) 4 hours to 90% (Internal batteries)
Expandable Runtime Yes
VOLTAGE REGULATION
Voltage Regulation Description Online, double-conversion power conditioning maintains output within 1% of the selected nominal voltage in online mode
Overvoltage Correction Corrects overvoltage conditions to 520V (50% load) and 478V (100% load)
Undervoltage Correction Corrects brownout conditions to 110V (50% load) / 305V (100% load)
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display LCD DISPLAY: offers a variety of graphical, text and numeric information to indicate a wide range of UPS operation and fault / warning conditions, including current operating mode, alarm status, load level, battery charge, input / output voltage & frequency, estimated runtime and more (see user manual for a detailed listing)
Switches ON / ENTER BUTTON: turns the UPS on and confirms a selection from the settings menu; OFF / ESC BUTTON: turns off the UPS and returns to the previous item in the settings menu; TEST / UP BUTTON: initiates UPS self-test operation and advances to the next item in the settings menu; MUTE / DOWN BUTTON: silences the audible alarm and advances to the previous item in the settings menu; Press TEST/UP & MUTE/DOWN buttons simultaneously for 1 second to enter or exit the settings menu (See user manual for detailed information)
Audible Alarm Alarms warn users of a variety of operational conditions: BYPASS MODE (beeps every 2 seconds), BATTERY MODE (beeps every 4 seconds), FAULT MODE (beeps continuously), OVERLOAD (beeps twice per second), OTHER WARNINGS (beeps once per second), FAULT (beeps continuously); All alarms can be silenced, except OVERLOAD & OTHER WARNINGS conditions
LED Indicators 4 LEDs report BYPASS / LINE / BATTERY / FAULT modes
PHYSICAL
Installation Form Factors Supported with Included Accessories Tower
Primary Form Factor Tower
UPS Power Module Dimensions (hwd, cm) 99.82 x 81.28 x 30.00
UPS Power Module Weight (kg) 233.60
Shipping Dimensions (hwd / cm) 124.00 x 43.00 x 92.00
Shipping Weight (kg) 255.00
Cooling Method Fans
UPS Housing Material Steel
UPS Power Module Dimensions (Height x Width x Depth, mm) 1000 x 300 x 813
Primary UPS Height (mm) 9,982
Primary UPS Width (mm) 8,128
Primary UPS Depth (mm) 3,000
ENVIRONMENTAL
Operating Temperature Range 0 to +40C (32-104F)
Storage Temperature Range 0 to +35C (32 to 95F) with battery; -15 to 60C (5 to +140F) without battery
Relative Humidity 5 to 95%, non-condensing
Operating Elevation (ft.) < 3000ft (Capacity de-rates by 1% for every 330ft over 3000)
Audible Noise <65dBA front side 1M
Operating Elevation (m) < 1000m (Capacity de-rates by 1% for every 100m over 1000)
COMMUNICATIONS
Communications Interface DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network Monitoring Port Description Card accessory slot also supports network interface and relay card options
Communications Cable DB9 cabling included
LINE / BATTERY TRANSFER
Transfer Time Zero transfer time in ONLINE MODE (0ms); ECONOMY MODE: 7ms from AC to Battery mode / 0.6ms from Battery to AC mode
Low Voltage Transfer to Battery Power (Setpoint) 110V (50% load) / 305V (100% load)
High Voltage Transfer to Battery Power (Setpoint) 520V (50% load) / 478V (100% load)
SPECIAL FEATURES
Grounding Lug Yes
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
High Availability UPS Features Automatic inverter bypass; Manual bypass switch
Green Energy-Saving Features High efficiency economy mode operation
CERTIFICATIONS
UPS Certifications CE
UPS Certification Details EN 62040-1-1 (Safety); EN 62040-2 (Category C3

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Tripp Lite SVT30KX UPS”

There are no reviews yet.

Got a question related to this product? Ask it here.


 
X
WhatsApp chat