, , ,

Ubiquiti UAP-AC-IW UniFi In-Wall WiFi Access Point

Availability:

In stock


  • Features three (3) 10/100/1000 Gigabit Ethernet Ports.
  • Simultaneous dual-band WiFi AC (300Mbps+887Mbps).
  • PoE+ powered offering Power PoE 802.3af to one device.
  • Mounting: 1-Gang Electrical Wall Box (Not Included).
  • WiFi Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES).
  • Advanced QoS: Per-User Rate Limiting.
  • WMM: Voice, Video, Best Effort, and Background.
  • Maximum Power Consumption: 7W.

UShs690,000 Inc. VAT

In stock

Product Description

The Ubiquiti UAP-AC-IW UniFi AP In-Wall WiFi PoE Access Point transforms an Ethernet wall connection into a dual-band 802.11AC WiFi Access Point. This Ubiquiti UAP-AC-IW features two (2) Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network. The Ubiquiti UniFi AC In-Wall AP provides simultaneous, dual-band, 2×2 MIMO technology. We recommend powering this Ubiquiti UniFi AC In-Wall AP with the UniFi PoE+ Switch as PoE+ adapters are not included.

Ubiquiti UAP-AC-IW UniFi In-Wall WiFi Access Point Features

Scalable Enterprise WiFi Management

Ubiquiti UniFi is the revolutionary Wi-Fi system that combines enterprise performance, unlimited scalability, and a central management controller. UniFi 802.11AC Dual-Radio Access Points (APs) have a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser, the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance.

Use the UniFi Controller software to quickly configure and administer an enterprise WiFi network – no special training required. RF map and performance features, real-time status, automatic UAP device detection, and advanced security options are all seamlessly integrated.

Please note: The Ubiquiti UAP-AC-IW UniFi In-Wall AP is designed to be surface mounted. Not suitable for a UK single or double gang backbox.

Easier Than You Think

Ideal for new and retrofit installations, the UniFi® AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access point with two Gigabit Ethernet ports. The UAP-IW-HD gives you Scalable. Dedicated Wi-Fi on a room to room basis; a fast, Two radio, 802.11ac connection and they are easy to Setup, Monitor and Control.

Versatile Data and PoE Output

The Ubiquiti UAP-IW-HD UniFi In-Wall AP can turn a simple outlet into an access point, gigabit switch, and a PoE power source. Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.

    • Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01″)
    • Weight: 210 g (7.41 oz)
    • Networking Interface: (3) 10/100/1000 Ethernet Ports
    • Buttons: Reset
    • Power Method: 802.3at PoE+ Supported
    • Power Supply: UniFi PoE Switch (Not Included)
    • Power Save: Supported
    • PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
      • PoE passthrough is supported by all of the UniFi switches except for the US-8 and US-8-60W
    • Maximum Power Consumption: 10W
      • With PoE Passthrough: 22W (Requires 802.3at PoE+ switch)
    • Maximum TX Power:
      • 2.4 GHz: 22 dBm
      • 5 GHz: 22 dBm
    • Antennas: (1) Dual-Band Antenna, Single-Polarity
      • 2.4 GHz: 5 dBi
      • 5 GHz: 6.5 dBi
    • Wi-Fi Standards: 802.11 a/b/g/n/ac
    • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
    • BSSID: Up to 8 per Radio
    • Mounting: 1-Gang Electrical Wall Box (Not Included)
    • Operating Temperature: -10 to 50° C (14 to 122° F)
    • Operating Humidity: 5 to 95% Noncondensing
    • Certifications: CE, FCC, IC

    Advanced Traffic Management

    • VLAN: 802.1Q
    • Advanced QoS: Per-User Rate Limiting
    • Guest Traffic Isolation: Supported
    • WMM: Voice, Video, Best Effort, and Background
    • Concurrent Clients: 250+

    Supported Data Rates (Mbps)

    • Standard: Data Rates
    • 802.11ac: 6.5 Mbps to 1300 Mbps (MCS0 – MCS9 NSS1/2/3, VHT 20/40/80)
    • 802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS15, HT 20/40)
    • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
    • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
    • 802.11b: 1, 2, 5.5, 11 Mbps

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ubiquiti UAP-AC-IW UniFi In-Wall WiFi Access Point”

*

There are no reviews yet.

Got a question related to this product? Ask it here.


 
X