Product Description
The Ubiquiti UAP-IW-HD UniFi In-Wall WiFi 5 PoE Access Point 3-Pack transforms Ethernet wall connections into dual-band 802.11AC WiFi Access Points. The UniFi UAP-IW-HD has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser and the UniFi app, the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance.
Ubiquiti UniFi Access Point InWall Hi-Density Point Features
Benefits of Cloud Hosting
- The unit is dispatched pre-provisioned – you just plug it in.
- Free dedicated technical support (9am-5pm Mon to Fri).
- You can manage multiple sites via a single login.
- Manage your WiFi network from anywhere.
- Hassle free!
Easy to deploy and manage!
The Ubiquiti UAP-IW-HD UniFi In-Wall WiFi PoE+ Access Point is fully provisioned prior to dispatch. So you simply connect it to your network via an Ethernet cable and away you go! Adding Access Points is simple! Just purchase any of the UniFi Cloud Controller Access Points to increase your WiFi network. They will be dispatched ready to join your network. With Ubiquiti UniFi”s user management, you can see exactly who and where devices are connected to your WiFi network. You can monitor user bandwidth and block users if required.
Hosted Controller Features
- Cloud-based service.
- Plug and go installation.
- One unified wireless network and single SSID.
- Multiple SSID support for Guest Networks etc.
- Remote management.
- User and Guest access.
- Remote Firmware Update.
- Email alerting of faults and problems.
Packed with Features
Use the UniFi Controller to provision thousands of UniFi APs, map out networks, quickly manage system traffic, and provision additional UniFi APs.
View Your RF Environment
Use the RF environment functionality of the UniFi UAP-IW-HD access point to detect and troubleshoot nearby interference, analyse radio frequencies, choose optimal AP placement, and configure settings.
Powerful RF Performance Features
Advanced RF performance and configuration features include spectral analysis, airtime fairness, and band steering.
Detailed Analytics
Use the configurable reporting and analytics to manage large user populations and expedite troubleshooting.
Wireless Uplink
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.
Guest Portal/Hotspot Support
Easy customisation and options for Guest Portals include authentication, Hotspot setup, and the ability to use your own external portal server. Use UniFi’s rate limiting for your Guest Portal/Hotspot package offerings. Apply different bandwidth rates (download/upload), limit total data usage, and limit duration of use.
All UniFi APs include Hotspot functionality:
- Built-in support for billing integration using major credit cards.
- Built-in support for voucher-based authentication.
- Built-in Hotspot Manager for voucher creation, guest management, and payment refunds.
- Full customisation and branding of Hotspot portal pages.
Multi-Site Management
A single UniFi Controller running in the cloud can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and administrator read/write and read-only accounts.
WLAN Groups
The UniFi Controller can manage flexible configurations of large deployments. Create multiple WLAN groups and assign them to an AP’s radio. Each WLAN can be VLAN tagged. Dynamic VLAN tagging per WiFi station (or RADIUS VLAN) is also supported.
802.11ac Technology
Initial 802.11ac Wave 1 SU-MIMO (Single-User, Multiple Input, Multiple Output) technology allows an earlier-generation AP, such as the UniFi AC Pro AP, to communicate with only one client at a time. 802.11ac Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP, such as the UniFi UAP-IW-HD AP, to communicate with multiple clients at the same time – significantly increasing multi-user throughput and overall user experience.
The following describes a 5-client scenario:
MU-MIMO
Assuming the same conditions, a Wave 2 AP provides up to 75% improvement overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.
4×4 Spatial Streams
At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
- Four 1×1 clients
- Two 2×2 clients
- One 2×2 client and two 1×1 clients
- One 3×3 client and one 1×1 client
A 4×4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3×3 in both radio bands.
Real-World Performance
The UniFi UAP-IW-HD access point is the first UniFi 802.11ac Wave 2 AP using the in-wall design. Combining the performance increases from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi UAP-IW-HD access point delivers up to 125% greater performance than a typical Wave 1 AP.
Client Compatibility
For optimal performance, use MU-MIMO clients. SU-MIMO clients will also benefit and gain up to 10-20% greater performance when used with the UniFi UAP-IW-HD access point.
Note: Actual performance values may vary depending on environmental and installation conditions.
High-Density Scenarios
For high-density environments, such as hotel suites and meeting rooms where there are numerous clients in a relatively small space, we recommend the UniFi UAP-IW-HD AP. Both Wave 1 and Wave 2 APs offer 28 independent (non-overlapping) channels: three for the 2.4 GHz band and twenty-five for the 5 GHz band, including DFS channels.
When you use the 2.4 GHz band in a high-density location, you encounter self-interference and channel saturation. When you use the 5 GHz band, you can deploy smaller cells (coverage areas), so you can support more clients in any cell that deploys more than one AP. With the advantages of MU-MIMO technology and 4×4 spatial reams, the UniFi UAP-IW-HD access point can support more than triple the number of users than a typical Wave 1 AP.
Note: Actual performance values may vary depending on environmental and installation conditions.
There are no reviews yet.